Kreyer Chilly Max 50 | Glycol Chiller/Heater | 1.8 Ton | 21,840 BTU Cooling Capacity | 230V Single Phase
Description
- Cooling & heating in one premium quality unit
- Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather
- Fill from the exterior without the need to remove covers or panels
- Program and monitor temperatures via the digital controller
- Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system
- Four locking casters offer ease-of-mobility when moving the unit around the winery
- 1.8 Ton / 21,840 Btu cooling capacity
- 230V, Single Phase power
- Made in Germany by Kreyer
Cooling and Heating in one unit!
Manufactured by Kreyer
Note: This unit runs off 230V single phase power. It will not run off 208V.
Please Note: This unit REQUIRES 230 v Single Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.
Water Cooling Unit - Kreyer Chilly 50
- Cools or Heats
- 1.8 Tons (21,840btu) of cooling power
- .85 Tons of heating power
- Can cool glycol/water bath down to -10C/14F or up to 42C/107F
- 230V 60Hz Single phase Power supply Required
- Rolls on four locking casters
- Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing
- 7 Gallon Insulated Plastic glycol/water reservoir
- Easy to fill from outside
- Evaporator coil made of stainless steel
- High-quality Grundfos recirculation pump
- Built in pressure switch shuts down recirculation pump when not needed
- Digital Thermostat
- Lifting/Crane Hooks for transport
- All panels remove for easy access
- All units pass multiple tests prior to shipment
- German Engineering
- Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius.
- 33"L x 25"W x 31.5"T
- Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet
- 6 Month Electrical Warranty
- 1 Year Mechanical Warranty
- CE Certified
This unit runs off 230V single phase power. It will not run off 208V.
Please Note: This unit REQUIRES 230 v Single Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

